Tips for Concreting in rainy season

-

Tips for Concreting in rainy season


Concreting in rainy season is one obstruction which is tackled very carefully.

Ready mix concrete gets much affected by rain if it still not reached its initial setting time. If ready mix concrete is in between its initial and final setting time than it will leave patch marks. If rain intensity is high than upper portion of ready mix concrete may get disturbed. If ready mix concrete has reached it final setting time than it turns into a source of curing of ready mix concrete.

Water content should be specified for the mixture and depends on the wetness and humidity of raw material. This water-cement ratio can be reduced by mixing suitable admixtures.

The use of hydrophilic crystalline admixtures when laying the concrete provides concrete with the resistance to infiltration of water under hydrostatic pressure. By using this admixture we can block pores and microcracks in the ready mix concrete thus preventing passage of water and this will decrease not only initial shrinkage cracks but also cracks for whole life span.

It must be remember that when pouring the ready mix concrete, weather condition should not be overly wet or windy.

Heavy winds are not suitable that cause shrinkage cracks. To avoid traffic jams and congestions, best accessible routes for RMC mixture trucks should be figured out in advance.

Plastic tarpaulins and rainproof canvas should be brought to the site in advance at the time of placing ready mix concrete. After the rainstorm tames down, assess the damage caused to the concrete surface visually. A simple scratch test can be conducted to compare the relative surface scratch hardness of areas in question to those slab sections known to be of good quality.

Minor repairs should be done immediately after rain stops.

--------------------------------------------------------------------------------------------------------

Like us on Facebook :- 

https://www.facebook.com/SanghiCement

Follow us on Linkedin :- 

https://www.linkedin.com/company/sanghi-industries-ltd

Subscribe us on Youtube :- 

https://www.youtube.com/SanghiIndustries-Ltd

For any Inquiry visit :- 

http://www.sanghicement.com/inquiry-form

Contact us on Whatsapp :- +91-79-26838000

--------------------------------------------------------------------------------------------------------


Blog written by

Shruti Doshi
Technical Officer – Sanghi Cement & Blogger
shruti.doshi@sanghicement.com
shrutidoshi.1492@gmail.com

Blog Managed by

Nirav Pandya
Digital Marketing Officer – Sanghi Cement
nirav.pandya@sanghicement.com


Comments

Post a Comment

Popular posts from this blog

Vacuum Concrete

-
Image
When hardening of concrete takes place excess water should be removed otherwise it will reduce concrete strength. So Vacuum concrete the type of concrete in which the excess water is removed for improving concrete strength. The water is removed by use of vacuum mats connected to a vacuum pump. Water cement ratio is important to achieve higher strength and Workability is also important for concrete, so it can be placed in the formwork easily without honeycombing. When Workability requirement is over this excess water will evaporate and leave capillary pores in the concrete and that leads to into high permeability and less strength in the concrete. Therefore, workability and high strength don’t go together as their requirements are contradictory to each other. This technique is such way unique that it can provide to fulfil these two requirement at the same time. This technique is used in industrial floors, parking lots and deck slabs of bridges  etc.  This can be done
Read more

Techniques of Soil Improvement

-
Image
Soilimprovement is to improve its engineering performance such as strength, reduced compressibility, reduced permeability, or improved ground water condition. There are various techniques used for the improvement of the soil based on the construction activity and type of soil. The soil improvement techniques are the following. Ø   Surface Compaction: This is process to make soil densify. Any soft and loose site needs a compacted base for lying the structure. All conventional rollers like smooth wheel, rubber-tyred, sheep foot, vibratory and grid rollers can be used. Ø   Drainage Methods: When the water presence increase that will create pore water pressure and decrease the shear strength so ground water has to be controlled. Heavy inflow of water can cause erosion. So certain methods will have to be adopted to control ground water. Ø   Vibration Methods: Vibration methods can be effectively used for rapid densification of saturated non-cohesive soils.Some of t
Read more